Since the first PoE product, an IP phone, was introduced in 2000, the number and variety of PoE applications have increased dramatically. As the concept gained acceptance (standardized) and as available power increased, the number and variety of applications supported by PoE exploded to include devices such as IP video phones, wireless LAN & WiMAX access points (WAP), IP cameras, thin-client and notebook computers, and LED lighting, to name a few.

Kinetic Technologies offers a broad portfolio of product solutions which integrate the PD physical interface and DC/DC controller functions into a single package. Supporting solutions from a few watts up to the maximum allowed, Kinetic Technologies provides high efficiency power solutions for nearly every PoE PD application.


Part Number Description VIN
(MIN)
(V) 		VIN
(MAX)
(V) 		Max. Drive Current per Channels (mA) Number of I/O Interrupt Out Addresses Operating Temperature Number of LEDs/Channel LED Channels Total Number of LEDs Brightness Control Control Switching Frequency (MHz) Safety Timer Maximum (ms) Max. LED Current per Channel (mA) Total Max LED Current (mA) Max. Current per Channel (mA) VOUT (V) Accuracy (%) IQ (μA) IQ shutdown (SDA=SCL=1.8V) (μA) Output OVP Output Auto-Discharge Dropout (mV) ON Resistance (mΩ) ON Resistance (Ω) Switch Con (pF) Max Current
(A) 		OVP Trip Point
(V) 		OVP Turn Off Response Time (ns) Max Output Power (W) PoE PD Support HW Mode Control SW Mode I2C Control Topology Number of Output Rails High Voltage Isolation CISPR22 and FCC Part 15 Input Voltage Range (V) Input Integrated Voltage Clamp (V) Output Voltage Range (V) Output Power (W)* IEC 61000-4-3 requirements for Radiated and Conducted Immunity IEC 61000-4-5 (Surge) IEC 61000-4-2 ESD (Air Discharge) IEC 61000-4-2 ESD (Contact Discharge) Cable Discharge Event (CDE) Package Package Alt. Package Alt. 1 Advantages